Wipers Skoda Octavia III Facelift Liftback (5E3) (2017–2020) | Front Set – TeamCar®

TeamCar® Wipers for Skoda Octavia III Facelift Liftback (5E3) (2017–2020) – Front Set

The Skoda Octavia III Facelift Liftback uses the Slim Push Button (16 mm) attachment system — standard for the VAG group's MQB platform. Replacing the blades is quick and simple, without special tools.

What the set contains

- 2 blades: 600 mm (24") driver + 475 mm (19") passenger
- Blade type: Flat (Beam)
- Material: Graphited natural rubber (SBR)
- Attachment: Slim Push Button 16 mm
- Installation guide included

⚠️ Attention: The Skoda Octavia III Facelift Liftback (5E3) has a rear wiper of 330 mm (OEM: 5E5955425) — different from the Combi version which has 400 mm (OEM: 5E9955425).

Why TeamCar® for Skoda Octavia III Facelift Liftback?

• • Flat blade with aerodynamic profile — no wind noise at high speeds
• • Uniform contact across the entire length of the windshield
• • Resistant to UV, rain, snow — consistent performance all year round
• • 100% guaranteed compatibility with all versions of Octavia III Facelift Liftback (5E3) (2017–2020)

Maintenance tip:

Do not use wipers on a dry or frozen windshield, as impurities and ice can immediately damage the fine edge of the blade. Choosing the right wipers before the start of the rainy season is essential for visibility and safety.

How often should I replace my wipers?

Most manufacturers recommend replacing them every 6-12 months or approximately every 12,000 kilometers.

Sun degradation:

Even if it hasn't rained, the sun and UV radiation during summer "bake" the rubber, making it rigid and brittle.

Original Codes (OE Skoda/VAG):

• Complete windshield set (front): 5E1998001
• Driver blade (600 mm): 5E1955425
• Passenger blade (475 mm): 5E1955426
• Rear window blade (400 mm): 5E5955425

Equivalents:

A863S-3397007863 VF371-574471 2800011116200 A400H-3397008634 VR271-574271

Installation Guide / Service Position:

1. Turn on the ignition for 2-3 seconds (press the Start/Stop button without pressing the brake/clutch).
2. Turn off the ignition (press the Start/Stop button again).
3. Briefly push the wiper lever down (single wipe position - MIST).
4. The wipers will immediately lift and remain locked in a vertical position on the windshield.

1. Turn on the ignition again.
2. Push the wiper lever down again or turn them on normally.
3. The blades will return by themselves to the base of the hood.